The Acoustimeter is a reliable, user friendly RF meter which enables you to make quick and informed decisions regarding the level and source of Radio Frequency signals in your environment. It comes equipped with two series of graduated LED lights and a LCD text display offering precise measurements with a lower update speed, giving you time to take note of the readings.
Displays peak, peak hold, and average levels of radio frequency electromagnetic fields, covering the spectrum from 200MHz all the way up to 8GHz (8000MHz) which covers the frequencies used by most modern communication systems
Peak exposure levels in V/m
Peak hold levels in V/m
Average exposure levels in µW/m2
A digital read out down to 0.02 V/m or 1uW/m2
An audio output which aids with source identification
Sound demodulation may be heard at RF levels below 0.02 V/m
The LCD display offers high accuracy with a lower update speed, giving you time to take note of the readings.
Typically 25 hours on two charged 2700 mAhr NIMH rechargeable batteries
Also offers: A speaker (and audio output socket for headphones or to feed to an audio recorder), allowing you to determine,with a small amount of practice, what type of device is creating the levels that are present. Sound samples are available to help you identify what type of signal your Acoustimeter is measuring. The sounds made by different transmitters can change with time, so these are meant as a rough guide only. If you are subject to a number of sources of RF, the sounds may intermingle and be less easily identified.
A built in antenna located at the top rear of the case. Signals are best measured with the source behind the instrument, but also quite good with the source to one or other side (particularly the left side away from the switches and volume control). It under-reads if the source is in front of the meter as the LCD display acts as an RF screen.